Holman 25mm PVC Manifolds boast UV resistance and are constructed with high-impact durability, ensuring watertight connections. These manifolds are well-suited for the installation of irrigation systems with solenoid valves. The socketed ends come equipped with captured o-rings and swivel adaptors, facilitating easy installation. Additionally, they are pressure-rated up to 1000kPa, made from PVC, and require no thread seal or pipe dope for a secure and efficient watertight connection.
FEATURES:
- Pressure rated to 1000kPa
- High impact construction
- Ideal for installing solenoid valve irrigation systems
- Made from PVC
- No thread seal or pipe dope required
- Watertight connection
- 2-Way Length: 200mm
- 3-Way Length: 300mm
- 4-Way Length: 390mm
| Size | Male Fitting End | Female Fitting End | Threads Per Inch | Actual Barb End | ||
|---|---|---|---|---|---|---|
| Metric Size (mm) | Imperial Size (inch) | Inner Diameter (mm) | Outer Diameter (mm) | Inner Diameter (mm) | Outer Diameter (mm) | |
| 6 | 1/8" | 3.18 | 10.16 | 10.16 | 28 | 3.18 |
| 7 | 3/16" | 28 | 4 | |||
| 8 | 1/4" | 6.35 | 13.66 | 13.66 | 19 | 6.35 |
| 9 | 5/16" | 19 | 8 | |||
| 10 | 3/8" | 9.53 | 17.17 | 17.17 | 19 | 9.53 |
| 15 | 1/2" | 12.7 | 21.51 | 21.51 | 14 | 12.7 |
| 18 | 5/8" | 14 | 15.88 | |||
| 20 | 3/4" | 19.04 | 27 | 27 | 14 | 19.04 |
| 25 | 1" | 25.4 | 33.93 | 33.93 | 11 | 25.4 |
| 32 | 11/4" | 31.75 | 42.59 | 42.59 | 11 | 31.75 |
| 40 | 11/2" | 38.1 | 48.48 | 48.48 | 11 | 38.1 |
| 50 | 2" | 50.8 | 60.47 | 60.47 | 11 | 50.8 |
| 65 | 21/2" | 63.5 | 76.09 | 76.09 | 11 | 63.5 |
| 80 | 3" | 76.26 | 88.87 | 88.87 | 11 | 76.26 |
| 100 | 4" | 101.07 | 114.14 | 114.14 | 11 | 101.07 |
| 150 | 6" | 152 | 165.12 | 165.12 | 11 | 152 |
Column Definitions:
Size (Imperial): Size designated to match the ID of Fitting in inches
Size (Metric): Size designated to match the ID of Fitting in mm
Male Thread ID (mm): The actual Inside diameter of the Male Fitting in millimetres.
Male Thread OD (mm): The actual outside diameter of the Male Fitting in millimetres
Female Thread ID (mm): The actual Inside diameter of the Female Fitting in millimetres.
Actual Barb OD (mm): The actual outside diameter of the Barbed fitting in millimetres.
