316 Stainless Steel Ball Valve – 3 Way – L Port

• Lockable full bore ball valve
• For use with air, water, hot/cold corrosive fluids in harsh environments
• Full port with threaded BSP ends
• Pressure rating 6895 kPa
• Temperature range < 180C
• Made with and approved to ISO9002 standards
• Split flow coming from one source between two outgoing destinations – left or right

• Thread: Female & Female
• Body & ball: 316 Stainless Steel
• Seals & seat: PTFE
• Body gasket: PTFE
• Cap: 316 Stainless Steel
• Stem: 316 Stainless Steel
• Thrust washer: PTFE
• Stem packing: PT
• Gland nut: 316 Stainless Steel
• Spring washer: 316 Stainless Steel
• Nut: 316 Stainless Steel
• Lockplate: 316 Stainless Steel
• Handle cover: Plastic
• Thread: BSP
• Pressure rating 6895 kPa
• Temperature range < 180C
• Made with and approved to ISO9002 standards

Size (In) Nominal Bore	Size (mm) Nominal Bore	Outside Diameter (mm)	L (mm)	H (mm)	W (mm)	Approx Weight (kg)
1/4"	8mm	14mm	71.5mm	53mm	125mm	0.67
3/8"	10mm	17mm	71.5mm	53mm	125mm	0.64
1/2"	15mm	21mm	71.5mm	53mm	125mm	0.59
3/4"	20mm	27mm	81mm	60mm	125mm	0.76
1"	25mm	34mm	91mm	68mm	153mm	1.11
1 1/4"	32mm	42mm	102mm	80mm	153mm	1.33
1 1/2"	40mm	48mm	112mm	95mm	195mm	2.02
2"	50mm	60mm	154mm	120mm	195mm	4.75

	Size	Male Fitting End		Female Fitting End	Threads Per Inch	Actual Barb End
Metric Size (mm)	Imperial Size (inch)	Inner Diameter (mm)	Outer Diameter (mm)	Inner Diameter (mm)		Outer Diameter (mm)
6	1/8"	3.18	10.16	10.16	28	3.18
7	3/16"				28	4
8	1/4"	6.35	13.66	13.66	19	6.35
9	5/16"				19	8
10	3/8"	9.53	17.17	17.17	19	9.53
15	1/2"	12.7	21.51	21.51	14	12.7
18	5/8"				14	15.88
20	3/4"	19.04	27	27	14	19.04
25	1"	25.4	33.93	33.93	11	25.4
32	11/4"	31.75	42.59	42.59	11	31.75
40	11/2"	38.1	48.48	48.48	11	38.1
50	2"	50.8	60.47	60.47	11	50.8
65	21/2"	63.5	76.09	76.09	11	63.5
80	3"	76.26	88.87	88.87	11	76.26
100	4"	101.07	114.14	114.14	11	101.07
150	6"	152	165.12	165.12	11	152

Column Definitions:
Size (Imperial):  Size designated to match the ID of Fitting in inches

Size (Metric):  Size designated to match the ID of Fitting in mm

Male Thread ID (mm):  The actual Inside diameter of the Male Fitting in millimetres.

Male Thread OD (mm):  The actual outside diameter of the Male Fitting in millimetres

Female Thread ID (mm):  The actual Inside diameter of the Female Fitting in millimetres.

Actual Barb OD (mm):  The actual outside diameter of the Barbed fitting in millimetres.

All products are covered by the full manufacturer’s warranty of 2 years. Should you have an item that is faulty we are happy to replace with a new one. Please contact us with details and/or photos of the fault as well as your contact details so we can discuss the issue and organise a replacement at our cost, or if you prefer we can provide a full refund. In some cases, we may request the item be returned to us depending on the issue.