Fire Fighting Pump Protector Sprinkler Kit 25x15mm
- Free shipping over $100
- 10% off and free shipping over $200
- 15% off and free shipping over $300
- 20% off and free shipping over $400
$31.35 Inc. GST
Our Fire Fighting Pump Protector Sprinkler Kit with an inlet of 25mm (1″) and outlet of 15mm (1/2″), a cutting-edge solution designed to safeguard your fire fighting pumps from the devastating impact of fires. This innovative kit goes beyond traditional protection measures by establishing and maintaining a protective wet area with an impressive 4 – 6 meter radius around the pump. By enveloping the pump in a continuous wet zone, our system acts as a formidable defense against the threat of destruction by fire, ensuring that your firefighting equipment remains operational and ready when it’s needed most. Trust in our Fire Fighting Pump Protector Sprinkler Kit to enhance the resilience of your firefighting infrastructure and provide a crucial layer of defense against potential disasters.
FEATURES:
- It serves as a safeguard for the pump, shielding it from potential ember and heat-related damage.
- Minimizes the likelihood of fuel vaporization, commonly known as vapor lock, thereby promoting consistent fuel flow.
- Acts as a preventative measure against the initiation of spot fires caused by the pump’s hot exhaust coming into contact with vegetation.
- 4 – 6m Water Radius Protection
- Holman Butterfly Sprinkler Head 15mm
- Galvanised Threaded Pipe 15mm
- Brass Ball Valve 15mm
- Galvanised Reducing Elbow 15 x 25mm
- White PTFE Tape 12mm x 10M
- Please Note: When sprinkler is running extra tank water will be used.
| Size | Male Fitting End | Female Fitting End | Threads Per Inch | Actual Barb End | ||
|---|---|---|---|---|---|---|
| Metric Size (mm) | Imperial Size (inch) | Inner Diameter (mm) | Outer Diameter (mm) | Inner Diameter (mm) | Outer Diameter (mm) | |
| 6 | 1/8" | 3.18 | 10.16 | 10.16 | 28 | 3.18 |
| 7 | 3/16" | 28 | 4 | |||
| 8 | 1/4" | 6.35 | 13.66 | 13.66 | 19 | 6.35 |
| 9 | 5/16" | 19 | 8 | |||
| 10 | 3/8" | 9.53 | 17.17 | 17.17 | 19 | 9.53 |
| 15 | 1/2" | 12.7 | 21.51 | 21.51 | 14 | 12.7 |
| 18 | 5/8" | 14 | 15.88 | |||
| 20 | 3/4" | 19.04 | 27 | 27 | 14 | 19.04 |
| 25 | 1" | 25.4 | 33.93 | 33.93 | 11 | 25.4 |
| 32 | 11/4" | 31.75 | 42.59 | 42.59 | 11 | 31.75 |
| 40 | 11/2" | 38.1 | 48.48 | 48.48 | 11 | 38.1 |
| 50 | 2" | 50.8 | 60.47 | 60.47 | 11 | 50.8 |
| 65 | 21/2" | 63.5 | 76.09 | 76.09 | 11 | 63.5 |
| 80 | 3" | 76.26 | 88.87 | 88.87 | 11 | 76.26 |
| 100 | 4" | 101.07 | 114.14 | 114.14 | 11 | 101.07 |
| 150 | 6" | 152 | 165.12 | 165.12 | 11 | 152 |
Column Definitions:
Size (Imperial): Size designated to match the ID of Fitting in inches
Size (Metric): Size designated to match the ID of Fitting in mm
Male Thread ID (mm): The actual Inside diameter of the Male Fitting in millimetres.
Male Thread OD (mm): The actual outside diameter of the Male Fitting in millimetres
Female Thread ID (mm): The actual Inside diameter of the Female Fitting in millimetres.
Actual Barb OD (mm): The actual outside diameter of the Barbed fitting in millimetres.
