Galvanised Malleable BSP Thread Water, Steam, Air and Gas Pipe Fittings

Galvanised Malleable BSP Thread Water, Steam, Air and Gas Pipe Fittings

Galvanised malleable iron pipe fittings EN10242 standard, BSP threaded, ½″–4″ NB. Durable, cost-effective, 1034 KPA rating for water systems.

Size Guide

Browse our wide range of galvanised malleable iron pipe fittings. Whether you need a few items to touch up your existing system, or looking to overhaul and start fresh, we have all the products you will need in a variety of shapes and sizes. If you can’t find what you’re looking for, be sure to send us a query via our “Contact Us” page. See below for a list of available products and specifications.

Hot Dipped Galvanised Steel Pipe and Gal Fittings Threaded BSP Tapered Both Ends made to Australian Standards No. EN 10242. Our High-Quality Galvanised Pipe Fittings range from ½” Inch to 4 Inch Nominal Bore across multiple lengths and are suitable for the flow of water up to a Maximum Working Pressure of 1034 KPA. Consisting of a highly durable composition our range of Gal Mal Fittings are a cost-effective option and provide for an easy application.

Specifications

  • Applications: General low-pressure air water and gas
  • Material: Malleable Cast Iron
  • Design Standard: EN 10242 (1994)
  • Working Pressure: 150PSI
  • Plating Standard: ISO 1461
  • Hot Dip Galvanised Coating
  • Complies with Australian Standards
  • Thread: BSPT

Frequently Asked Questions

What are the different surface treatments for Galvanised Fittings?

Galvanized Malleable Fittings undergo hot-dip galvanizing for corrosion resistance. This involves cleaning, dipping in molten zinc, and forming a protective alloy layer.

Galvanized Steel Fittings undergo cold galvanizing or electro-galvanizing, with a thin zinc layer (10-50g/m2) using electrolysis, resulting in weak corrosion resistance.

What is standard EN 10242?

EN 10242 is a European standard for threaded malleable cast iron pipe fittings, providing specifications for dimensions and quality in plumbing applications.

What is standard AS/NZS 4792?

AS/NZS 4792 specifies hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or specialized process, applicable to certain types of fittings.

What are the permissible working pressures and temperatures?

For temperatures between 120°C and 300°C, intermediate pressure ratings can be determined using linear interpolation. In regular use, the fittings are suitable for service at temperatures as low as -20°.

Galvanised Malleable BSP Thread Water, Steam, Air and Gas Pipe Fittings

Note: All products comes with a 2-year warranty.

45 Degree Elbow F&F

45 Degree Elbow F&F - Drawing
SIZE (IN) SIZE (MM) A (MM)
½″ 15mm 22mm
¾″ 20mm 25mm
1″ 25mm 28mm
1¼″ 32mm 33mm
1½″ 40mm 36mm
2″ 50mm 43mm
2½″ 65mm 65mm
3″ 80mm 80mm
4″ 100mm 100mm

Backnut

Backnut - Drawing
SIZE (IN) SIZE (MM) A (MM) S (MM) APPROX WEIGHT KG
½″ 15mm 9mm 29mm 0.03
¾″ 20mm 10mm 36mm 0.04
1″ 25mm 11mm 45mm 0.06
1¼″ 32mm 11mm 56mm 0.09
1½″ 40mm 12mm 63mm 0.11
2″ 50mm 13mm 77mm 0.18
3″ 80mm 18mm 109mm 0.54

Bend F&F

Bend F&F - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
½″ 15mm 52mm 0.13
¾″ 20mm 65mm 0.24
1″ 25mm 82mm 0.35
1¼″ 32mm 100mm 0.61
1½″ 40mm 115mm 0.77
2″ 50mm 140mm 1.3
2½″ 65mm 175mm 2.4
3″ 80mm 205mm 3.57
4″ 100mm 260mm 6.5

Bend M&F

Bend M&F - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
½″ 15mm 52mm 0.10
¾″ 20mm 65mm 0.19
1″ 25mm 65mm 0.30
1¼″ 32mm 100mm 0.53
1½″ 40mm 115mm 0.66
2″ 50mm 140mm 1.20
2½″ 65mm 175mm 2.25
3″ 80mm 205mm 3.00
4″ 100mm 260mm 6.75

Cap

Cap - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
⅜″ 10mm 17mm 0.04
½″ 15mm 19mm 0.06
¾″ 20mm 22mm 0.08
1″ 25mm 24mm 0.14
1¼″ 32mm 27mm 0.21
1½″ 40mm 28mm 0.30
2″ 50mm 50mm 0.45
2½″ 65mm 65mm 0.72
3″ 80mm 80mm 1.14
4″ 100mm 100mm 1.85
6″ 150mm 150mm 2.77

Cross

Cross - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
½″ 15mm 27mm 0.19
¾″ 20mm 32mm 0.29
1″ 25mm 37mm 0.45
1¼″ 32mm 44.5mm 0.66
1½″ 40mm 48.5mm 0.86
2″ 50mm 57mm 1.34
2½″ 65mm 65mm 2.49
3″ 80mm 80mm 3.59
4″ 100mm 100mm 6.43

Drilled Flange

Drilled Flange - Drawing
SIZE (IN) SIZE (MM) A (MM) B (MM) C (MM) APPROX WEIGHT KG
½″ 15mm 95mm 12.7mm 7.2mm 0.29
¾″ 20mm 102mm 15.9mm 7.9mm 0.33
1″ 25mm 114mm 17.5mm 8.7mm 0.46
1¼″ 32mm 121mm 19.1mm 8.7mm 0.45
1½″ 40mm 133mm 22.2mm 9.5mm 0.62
2″ 50mm 152mm 25.4mm 10.3mm 0.96
2½″ 65mm 165mm 30mm 10.3mm 1.28
3″ 80mm 184mm 33.8mm 10.3mm 1.75
4″ 100mm 216mm 39mm 11.2mm 2.63
6″ 150mm 279mm 41.7mm 13.8mm 4.72

Elbow M&F

Elbow M&F - Drawing
SIZE (IN) SIZE (MM) A (MM) B (MM) APPROX WEIGHT KG
¼″ 8mm 20mm 28mm 0.05
⅜″ 10mm 25mm 33mm 0.07
½″ 15mm 28mm 38mm 0.10
¾″ 20mm 33mm 44mm 0.18
1″ 25mm 38mm 52mm 0.27
1¼″ 32mm 45mm 60mm 0.43
1½″ 40mm 50mm 65mm 0.62
2″ 50mm 58mm 74mm 1.02
2½″ 65mm 69mm 90mm 1.51
3″ 80mm 77.5mm 100mm 2.39
4″ 100mm 96.5mm 120mm 4.06

Elbow 45 Degree M&F

Elbow 45 Degree M&F - Drawing
SIZE (IN) SIZE (MM) A (MM) B (MM) APPROX WEIGHT KG
½″ 15mm 21.9mm 33mm 0.09
¾″ 20mm 24.4mm 37.5mm 0.13
1″ 25mm 27.9mm 43mm 0.22
1¼″ 32mm 32.1mm 47.4mm 0.32
1½″ 40mm 35.6mm 52mm 0.46
2″ 50mm 41.8mm 60.4mm 0.76

Elbow F&F

Elbow F&F - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
¼″ 8mm 20mm 0.05
⅜″ 10mm 24mm 0.1
½″ 15mm 27mm 0.1
¾″ 20mm 32mm 0.2
1″ 25mm 37mm 0.3
1¼″ 32mm 44.5mm 0.4
1½″ 40mm 40mm 0.6
2″ 50mm 50mm 0.8
2½″ 65mm 65mm 1.5
3″ 80mm 80mm 2.3
4″ 100mm 100mm 4.1
6″ 150mm 150mm 10.7

Hex Nipple - Male

Hex Nipple - Male - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
⅛″ 6mm 30.2mm 0.01
¼″ 8mm 36mm 0.03
⅜″ 10mm 36mm 0.04
½″ 15mm 44mm 0.07
¾″ 20mm 47mm 0.11
1″ 25mm 53mm 0.19
1¼″ 32mm 56mm 0.28
1½″ 40mm 58mm 0.34
2″ 50mm 68mm 0.54
2½″ 50mm 73mm 0.50
3″ 80mm 81mm 0.83
4″ 100mm 95mm 1.16
6″ 150mm 117.5mm 3

Plug

Plug - Drawing
SIZE (IN) SIZE (MM) A (MM) C (MM) APPROX WEIGHT KG
⅛″ 6mm 15.9mm 7.1mm 0.01
¼″ 8mm 18.7mm 9.5mm 0.02
⅜″ 10mm 20.6mm 11.0mm 0.02
½″ 15mm 24.4mm 14.3mm 0.04
¾″ 20mm 27.7mm 15.9mm 0.06
1″ 25mm 31.8mm 20.9mm 0.10
1¼″ 32mm 35.1mm 23.8mm 0.15
1½″ 40mm 37.5mm 28.6mm 0.19
2″ 50mm 40.5mm 33.3mm 0.31
2½″ 65mm 50.8mm 38.1mm 0.41
3″ 80mm 49.7mm 42.9mm 0.76
4″ 100mm 56.4mm 58.0mm 1.37
6″ 150mm 67.4mm 77mm 5.18

Reducing Bush

Reducing Bush - Drawing
SIZE (MM) SIZE (IN) A (MM) C (MM) APPROX WEIGHT KG
20 × 8mm ¾″ × ¼″ 21.6mm 29.2mm 0.06
20 × 15mm ¾″ × ½″ 23.6mm 29.2mm 0.05
25 × 8mm 1″ × ¼″ 28.7mm 28.5mm 0.09
25 × 15mm 1″ × ½″ 28.0mm 36.1mm 0.09
25 × 20mm 1″ × ¾″ 28.0mm 36.1mm 0.08
32 × 15mm 1¼″ × ½″ 31.4mm 31.5mm 0.14
32 × 20mm 1¼″ × ¾″ 27.4mm 44.7mm 0.16
32 × 25mm 1¼″ × 1″ 27.4mm 44.7mm 0.13
40 × 20mm 1½″ × ¾″ 33.0mm 36.5mm 0.18
40 × 25mm 1½″ × 1″ 31.2mm 50.8mm 0.21
40 × 32mm 1½″ × 1¼″ 31.2mm 50.8mm 0.15
50 × 20mm 2″ × ¾″ 35.3mm 41.4mm 0.29
50 × 25mm 2″ × 1″ 35.3mm 45.0mm 0.30
50 × 32mm 2″ × 1¼″ 38.0mm 63.0mm 0.34
50 × 40mm 2″ × 1½″ 38.0mm 63.0mm 0.28
65 × 50mm 2½″ × 2″ 39.1mm 75.7mm 0.46
80 × 40mm 3″ × 1½″ — — —
80 × 50mm 3″ × 2″ 40.9mm 98.0mm 0.78
80 × 65mm 3″ × 2½″ 40.9mm 98.0mm 0.76
100 × 50mm 4″ × 2″ 51.2mm 83.3mm 1.14
100 × 65mm 4″ × 2½″ 46.2mm 98.1mm 1.30
100 × 80mm 4″ × 3″ 51.0mm 126.0mm 1.34
150 × 100mm 2″ × 4″ — — —

Elbow 90 Degree - F&F

Elbow 90 Degree - F&F - Drawing
SIZE (IN) SIZE (MM)
⅜″ 20 × 10mm
½″ 20 × 15mm
⅜″ 25 × 10mm
½″ 25 × 15mm
¾″ 25 × 20mm
½″ 32 × 15mm
¾″ 32 × 20mm
1″ 32 × 25mm
¾″ 40 × 20mm
1″ 40 × 25mm
1¼″ 40 × 32mm
1″ 50 × 25mm
1¼″ 50 × 32mm
1½″ 50 × 40mm

Reducing Nipple

Reducing Nipple - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
⅜″ × ¼″ 10 × 8mm 38mm 0.03
½″ × ¼″ 15 × 8mm 44mm 0.05
½″ × ⅜″ 15 × 10mm 44mm 0.05
¾″ × ⅜″ 20 × 10mm 47mm 0.10
¾″ × ½″ 20 × 15mm 47mm 0.10
1″ × ½″ 25 × 15mm 53mm 0.12
1″ × ¾″ 25 × 20mm 53mm 0.12
1¼″ × ¾″ 32 × 20mm 57mm 0.22
1¼″ × 1″ 32 × 25mm 57mm 0.22
1½″ × ¾″ 40 × 20mm 59mm 0.30
1½″ × 1″ 40 × 25mm 59mm 0.30
1½″ × 1¼″ 40 × 32mm 59mm 0.30
2″ × 1″ 50 × 25mm 68mm 0.42
2″ × 1¼″ 50 × 32mm 68mm 0.42
2″ × 1½″ 50 × 40mm 68mm 0.42
2½″ × 2″ 65 × 50mm 75mm 0.69
3″ × 2″ 80 × 50mm 83mm 1.00
3″ × 2½″ 80 × 65mm 83mm 1.00
4″ × 2″ 100 × 50mm 92mm 1.42
4″ × 2½″ 100 × 65mm 92mm 1.42
4″ × 3″ 100 × 80mm 92mm 1.42

Reducing Socket

Reducing Socket - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
½″ × ¼″ 15 × 8mm 31.8mm 0.05
½″ × ⅜″ 15 × 10mm 31.8mm 0.07
¾″ × ⅜″ 20 × 10mm 36.6mm 0.10
¾″ × ½″ 20 × 15mm 36.6mm 0.11
1″ × ⅜″ 25 × 10mm 42.9mm 0.16
1″ × ½″ 25 × 15mm 42.9mm 0.16
1″ × ¾″ 25 × 20mm 42.9mm 0.18
1¼″ × ¾″ 32 × 20mm 52.3mm 0.26
1¼″ × 1″ 32 × 25mm 52.3mm 0.28
1½″ × ¾″ 40 × 20mm 58.7mm 0.32
1½″ × 1″ 40 × 25mm 58.7mm 0.35
1½″ × 1¼″ 40 × 32mm 58.7mm 0.39
2″ × ¾″ 50 × 20mm 71.4mm 0.52
2″ × 1″ 50 × 25mm 71.4mm 0.55
2″ × 1¼″ 50 × 32mm 71.4mm 0.54
2″ × 1½″ 50 × 40mm 71.4mm 0.62
2½″ × 1½″ 65 × 40mm 71.4mm 0.62
2½″ × 2″ 65 × 50mm 82.6mm 1.01
3″ × 2″ 80 × 50mm 93.7mm 1.50
3″ × 2½″ 80 × 65mm 93.7mm 1.61
4″ × 2″ 100 × 50mm 111.3mm 2.52
4″ × 2½″ 100 × 65mm 111.3mm 2.68
4″ × 3″ 100 × 80mm 111.3mm 2.74

Reducing Tee

Reducing Tee - Drawing
SIZE (IN) SIZE (MM) A (MM) B (MM) APPROX WEIGHT KG
¾″ × ⅜″ 20 × 10mm 59.0mm 29.0mm 0.17
¾″ × ½″ 20 × 15mm 59.0mm 30.5mm 0.26
1″ × ⅜″ 25 × 10mm 61.5mm 31.8mm 0.22
1″ × ½″ 25 × 15mm 62.6mm 31.8mm 0.25
1″ × ¾″ 25 × 20mm 70.0mm 36.7mm 0.25
1¼″ × ½″ 32 × 15mm 65.7mm 37.5mm 0.30
1¼″ × ¾″ 32 × 20mm 74.2mm 42.0mm 0.43
1¼″ × 1″ 32 × 25mm 78.3mm 41.5mm 0.38
1½″ × ½″ 40 × 15mm 69.7mm 41.0mm 0.37
1½″ × ¾″ 40 × 20mm 74.4mm 42.0mm 0.46
1½″ × 1″ 40 × 25mm 74.4mm 45.0mm 0.50
1½″ × 1¼″ 40 × 32mm 93.0mm 48.5mm 0.68
2″ × ½″ 50 × 15mm 74.7mm 48.0mm 0.55
2″ × ¾″ 50 × 20mm 80.0mm 49.0mm 0.60
2″ × 1″ 50 × 25mm 88.9mm 56.0mm 0.85
2″ × 1¼″ 50 × 32mm 98.4mm 51.0mm 0.95
2″ × 1½″ 50 × 40mm 109.4mm 52mm 0.86
3″ × 2″ 80 × 50mm 126.0mm 70.0mm 1.83
4″ × 3″ 100 × 80mm — — —

Socket

Socket - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
⅛″ 6mm 24.4mm 0.03
¼″ 8mm 26.9mm 0.04
⅜″ 10mm 29.5mm 0.10
½″ 15mm 34.0mm 0.10
¾″ 20mm 38.6mm 0.10
1″ 25mm 42.4mm 0.20
1¼″ 32mm 49.0mm 0.30
1½″ 40mm 54.6mm 0.40
2″ 50mm 64.6mm 0.60
2½″ 65mm 73.2mm 1.10
3″ 80mm 80.8mm 1.60
4″ 100mm 93.7mm 2.60
6″ 150mm 105.0mm 4.50

Tee

Tee - Drawing
SIZE (IN) SIZE (MM) A (MM) APPROX WEIGHT KG
⅛″ 6mm 17.5mm 0.05
¼″ 8mm 20.6mm 0.07
⅜″ 10mm 24.1mm 0.10
½″ 15mm 28.5mm 0.16
¾″ 20mm 33.3mm 0.22
1″ 25mm 38.1mm 0.38
1¼″ 32mm 44.5mm 0.59
1½″ 40mm 49.3mm 0.75
2″ 50mm 57.3mm 0.01
2½″ 65mm 68.6mm 2.02
3″ 80mm 78.2mm 3.05
4″ 100mm 96.3mm 5.13
6″ 150mm 119.3mm 9.60

Unions - Brass Seated

Unions - Brass Seated - Drawing
SIZE (IN) SIZE (MM) A APPROX WEIGHT KG
½″ 15mm 41.5 0.24
¾″ 20mm 45.0 0.35
1″ 25mm 49.0 0.53
1¼″ 32mm 58.0 0.75
1½″ 40mm 63.0 0.95
2″ 50mm 77.0 1.47
2½″ 65mm 79.0 2.41
3″ 80mm 82.0 3.15
4″ 100mm 99.5 5.45

Galvanised Pipe Pieces - Threaded BSP Both Ends

High quality, long lasting, galvanised pipe pieces. Threaded BSP both ends. Various sizes available.

NOMINAL SIZE WIDTH (IN) NOMINAL SIZE WIDTH (MM) OUTSIDE DIAMETER WIDTH (MM) WALL THICKNESS (MM) LENGTH (IN) LENGTH (MM) APPROX WEIGHT (KG)
½″ 15mm 21.3mm 2.6mm 4″ 100mm 0.10
½″ 15mm 21.3mm 2.6mm 6″ 150mm 0.15
½″ 15mm 21.3mm 2.6mm 8″ 200mm 0.20
½″ 15mm 21.3mm 2.6mm 10″ 250mm 0.25
½″ 15mm 21.3mm 2.6mm 12″ 300mm 0.30
½″ 15mm 21.3mm 2.6mm 18″ 450mm 0.45
½″ 15mm 21.3mm 2.6mm 24″ 600mm 0.60
½″ 15mm 21.3mm 2.6mm 30″ 750mm 0.75
½″ 15mm 21.3mm 2.6mm 36′ 900mm 0.90
¾″ 20mm 26.9mm 2.6mm 4″ 100mm 0.13
¾″ 20mm 26.9mm 2.6mm 6″ 150mm 0.20
¾″ 20mm 26.9mm 2.6mm 10″ 250mm 0.33
¾″ 20mm 26.9mm 2.6mm 12″ 300mm 0.39
¾″ 20mm 26.9mm 2.6mm 18″ 450mm 0.59
¾″ 20mm 26.9mm 2.6mm 24″ 600mm 0.78
¾″ 20mm 26.9mm 2.6mm 30″ 750mm 0.98
¾″ 20mm 26.9mm 2.6mm 36″ 900mm 1.17
1″ 25mm 33.7mm 3.2mm 4″ 100mm 0.21
1″ 25mm 33.7mm 3.2mm 6″ 150mm 0.32
1″ 25mm 33.7mm 3.2mm 8″ 200mm 0.42
1″ 25mm 33.7mm 3.2mm 10″ 250mm 0.53
1″ 25mm 33.7mm 3.2mm 12″ 300mm 0.63
1″ 25mm 33.7mm 3.2mm 18″ 450mm 0.95
1″ 25mm 33.7mm 3.2mm 24″ 600mm 1.26
1″ 25mm 33.7mm 3.2mm 30″ 750mm 1.58
1″ 25mm 33.7mm 3.2mm 36″ 900mm 1.89
1¼″ 32mm 42.4mm 3.2mm 4″ 100mm 0.24
1¼″ 32mm 42.4mm 3.2mm 6″ 150mm 0.36
1¼″ 32mm 42.4mm 3.2mm 8″ 200mm 0.48
1¼″ 32mm 42.4mm 3.2mm 10″ 250mm 0.60
1¼″ 32mm 42.4mm 3.2mm 12″ 300mm 0.72
1 ¼′ 32mm 42.4mm 3.2mm 18″ 450mm 1.08
1¼″ 32mm 42.4mm 3.2mm 30″ 750mm 1.80
1¼″ 32mm 42.4mm 3.2mm 36″ 900mm 2.16
1½″ 40mm 48.3mm 3.2mm 4″ 100mm 0.31
1½″ 40mm 48.3mm 3.2mm 6″ 150mm 0.47
1½″ 40mm 48.3mm 3.2mm 8″ 200mm 0.62
1½″ 40mm 48.3mm 3.2mm 10″ 250mm 0.78
1½″ 40mm 48.3mm 3.2mm 12″ 300mm 0.93
1½″ 40mm 48.3mm 3.2mm 18″ 450mm 1.40
1½″ 40mm 48.3mm 3.2mm 30″ 750mm 2.33
1½″ 40mm 48.3mm 3.2mm 36″ 900mm 2.79
2″ 50mm 60.3mm 3.6mm 4″ 100mm 0.41
2″ 50mm 60.3mm 3.6mm 6″ 150mm 0.62
2″ 50mm 60.3mm 3.6mm 8″ 200mm 0.82
2″ 50mm 60.3mm 3.6mm 10″ 250mm 1.03
2″ 50mm 60.3mm 3.6mm 12″ 300mm 1.23
2″ 50mm 60.3mm 3.6mm 18″ 450mm 1.85
2″ 50mm 60.3mm 3.6mm 30″ 750mm 3.08
2″ 50mm 60.3mm 3.6mm 36″ 900mm 3.69
Shopping Cart